Messages

1

Discussion / Re: What's the research path for the coilgun?

« on: September 04, 2009, 06:04:29 pm »

It was changed recently(?), now you need Needler gun for it IIRC.

-geever

Thank you!

2

Discussion / What's the research path for the coilgun?

« on: September 04, 2009, 12:56:13 pm »

I see a number of folks singing the coilgun's praises, but it hasn't come up for me to research in the game (2.3 rev 25988)
For some reason I thought it came up after the bolt rifle, but is there something else I need to research first?

3

Mac / Re: Problem with making a Mac universal binary

« on: September 03, 2009, 11:40:03 pm »

No worries, Mattn - i can still run the game from the Terminal command line, after all.
I certainly appreciate your willingness to help me figure it out ;-)

4

Mac / Re: Problem with making a Mac universal binary

« on: September 03, 2009, 09:59:19 am »

ups - also type

    make uforadiant

please

I did type "make uforadiant" and then tried "make macinstaller" again, but received the same error message as before.
Looking through the log of the "make uforadiant" action, it looks like i'm getting quite a few errors, though in all honesty i don't know code at all so they could be nothing.

Code: [Select]

[sandrock-meets-pascal:~/ufoai/trunk] sandrock% make uforadiant
 * [RAD] src/tools/radiant/plugins/model/plugin.cpp
In file included from src/tools/radiant/libs/debugging/debugging.h:30,
                 from src/tools/radiant/include/modulesystem.h:31,
                 from src/tools/radiant/include/iscenegraph.h:242,
                 from src/tools/radiant/plugins/model/plugin.cpp:30:
src/tools/radiant/libs/stream/textstream.h:36:18: error: glib.h: No such file or directory
In file included from src/tools/radiant/libs/debugging/debugging.h:30,
                 from src/tools/radiant/include/modulesystem.h:31,
                 from src/tools/radiant/include/iscenegraph.h:242,
                 from src/tools/radiant/plugins/model/plugin.cpp:30:
src/tools/radiant/libs/stream/textstream.h:36:18: error: glib.h: No such file or directory
src/tools/radiant/libs/stream/textstream.h: In function ‘TextOutputStreamType& ostream_write(TextOutputStreamType&, double)’:
src/tools/radiant/libs/stream/textstream.h:131: error: there are no arguments to ‘g_snprintf’ that depend on a template parameter, so a declaration of ‘g_snprintf’ must be available
src/tools/radiant/libs/stream/textstream.h:131: error: (if you use ‘-fpermissive’, G++ will accept your code, but allowing the use of an undeclared name is deprecated)
src/tools/radiant/libs/stream/textstream.h: In function ‘TextOutputStreamType& ostream_write(TextOutputStreamType&, const HexChar&)’:
src/tools/radiant/libs/stream/textstream.h:199: error: there are no arguments to ‘g_snprintf’ that depend on a template parameter, so a declaration of ‘g_snprintf’ must be available
src/tools/radiant/libs/stream/textstream.h: In function ‘TextOutputStreamType& ostream_write(TextOutputStreamType&, const FloatFormat&)’:
src/tools/radiant/libs/stream/textstream.h:218: error: there are no arguments to ‘g_snprintf’ that depend on a template parameter, so a declaration of ‘g_snprintf’ must be available
src/tools/radiant/libs/stream/textstream.h: In function ‘TextOutputStreamType& ostream_write(TextOutputStreamType&, const Decimal&)’:
src/tools/radiant/libs/stream/textstream.h:237: error: there are no arguments to ‘g_snprintf’ that depend on a template parameter, so a declaration of ‘g_snprintf’ must be available
src/tools/radiant/libs/stream/textstream.h: In function ‘TextOutputStreamType& ostream_write(TextOutputStreamType&, double)’:
src/tools/radiant/libs/stream/textstream.h:131: error: there are no arguments to ‘g_snprintf’ that depend on a template parameter, so a declaration of ‘g_snprintf’ must be available
src/tools/radiant/libs/stream/textstream.h:131: error: (if you use ‘-fpermissive’, G++ will accept your code, but allowing the use of an undeclared name is deprecated)
src/tools/radiant/libs/stream/textstream.h: In function ‘TextOutputStreamType& ostream_write(TextOutputStreamType&, const HexChar&)’:
src/tools/radiant/libs/stream/textstream.h:199: error: there are no arguments to ‘g_snprintf’ that depend on a template parameter, so a declaration of ‘g_snprintf’ must be available
src/tools/radiant/libs/stream/textstream.h: In function ‘TextOutputStreamType& ostream_write(TextOutputStreamType&, const FloatFormat&)’:
src/tools/radiant/libs/stream/textstream.h:218: error: there are no arguments to ‘g_snprintf’ that depend on a template parameter, so a declaration of ‘g_snprintf’ must be available
src/tools/radiant/libs/stream/textstream.h: In function ‘TextOutputStreamType& ostream_write(TextOutputStreamType&, const Decimal&)’:
src/tools/radiant/libs/stream/textstream.h:237: error: there are no arguments to ‘g_snprintf’ that depend on a template parameter, so a declaration of ‘g_snprintf’ must be available
src/tools/radiant/libs/string/string.h: In function ‘int string_compare_nocase(const char*, const char*)’:
src/tools/radiant/libs/string/string.h:88: error: ‘g_ascii_strcasecmp’ was not declared in this scope
src/tools/radiant/libs/string/string.h: In function ‘int string_compare_nocase_n(const char*, const char*, size_t)’:
src/tools/radiant/libs/string/string.h:97: error: ‘g_ascii_strncasecmp’ was not declared in this scope
src/tools/radiant/libs/string/string.h: In function ‘int string_compare_nocase(const char*, const char*)’:
src/tools/radiant/libs/string/string.h:88: error: ‘g_ascii_strcasecmp’ was not declared in this scope
src/tools/radiant/libs/string/string.h: In function ‘int string_compare_nocase_n(const char*, const char*, size_t)’:
src/tools/radiant/libs/string/string.h:97: error: ‘g_ascii_strncasecmp’ was not declared in this scope
src/tools/radiant/plugins/model/plugin.cpp: In function ‘void PicoPrintFunc(int, const char*)’:
src/tools/radiant/plugins/model/plugin.cpp:60: error: ‘g_message’ was not declared in this scope
src/tools/radiant/plugins/model/plugin.cpp:68: error: ‘g_warning’ was not declared in this scope
src/tools/radiant/plugins/model/plugin.cpp:76: error: ‘g_critical’ was not declared in this scope
src/tools/radiant/plugins/model/plugin.cpp: In function ‘void PicoPrintFunc(int, const char*)’:
src/tools/radiant/plugins/model/plugin.cpp:60: error: ‘g_message’ was not declared in this scope
src/tools/radiant/plugins/model/plugin.cpp:68: error: ‘g_warning’ was not declared in this scope
src/tools/radiant/plugins/model/plugin.cpp:76: error: ‘g_critical’ was not declared in this scope
lipo: can't figure out the architecture type of: /var/folders/I+/I+wF2o4r2RaxDU+1YuUSk++++TI/-Tmp-//ccUCOMBK.out
make: *** [debug-darwin-universal/tools/radiant/plugins_cpp/tools/radiant/plugins/model/plugin.o] Error 1


5

Mac / Re: Problem with making a Mac universal binary

« on: September 03, 2009, 08:53:53 am »

Mattn, thank you for the quick response ;-)

i ran the command string you posted, and this is what I got back (well, the end of it):

cd src/ports/macosx/installer; make TARGET_CPU=universal
cp: ../../../../radiant/uforadiant: No such file or directory
make[1]: *** [copybinaries] Error 1
make: *** [macinstaller] Error 2

6

Mac / Problem with making a Mac universal binary

« on: September 03, 2009, 07:31:52 am »

Hey folks - new to the forums, been lurking a bit.
After playing with the stable 2.2.1 release for a while, I thought I'd try my hand at SVN-ing and compiling the 2.3 development version.
So, I followed the directions here:http://ufoai.ninex.info/wiki/index.php/Compile_for_Mac
Using Macports. Oh, and I'm on a Macbook, Intel Core 2 Duo 2.16 GHz

Trouble is, after I've gone through make/make lang/make maps/make pk3 steps, and try the make bundle TARGET_CPU=universal command, i get this message in Terminal:
cp: ../../../../radiant/uforadiant: No such file or directory
make: *** [copybinaries] Error 1

it does make a UFOAI.app file, but when I click on the app, it gives me this dialogue box:
You can't open the application "UFOAI" because it is not supported on this architecture

I'm a bit new to all this compiling and whatnot (though i'm eager to learn) - can anyone point me in the right direction here?
How do I tell what architecture my system uses?

I'd really love to be able to compile the newest versions, make dmgs, and upload them for you all, since it only takes me a few hours to do the whole process, and it seems there's just a couple others on here who have Macs fast enough and with enough space to do that.

7

Bugs prior to release 2.3 / Game Crash on Tactical Map - Error: Received signal 11. - Rev 25988

« on: September 03, 2009, 07:17:29 am »

Hey folks -

Important info first:
SVN (via Macports) trunk, revision 25988, compiled by me
also used the contrib/scripts/map-get upgrade script before compiling the maps

OS X 10.5.8
Macbook 2.16 Ghz Intel Core 2 Duo

  Chipset Model:   GMA 950
  Type:   Display
  Bus:   Built-In
  VRAM (Total):   64 MB of Shared System Memory

I don't know what architecture my system uses, I'm a bit new to this . . . how would i find out that info?

The bug:
After loading a tactical/battlescape map, the screen shows the GUI, but no map, just black in the middle, and then the game crashes to desktop. On my Terminal, which I have running the background, I receive the following error message:
Error: Received signal 11.

The bug is reproducible - I've both started new games, with bases in different parts of the world, and the game crashes no matter which map is loaded. I've also loaded a saved game from immediately before the aircraft reaches the crash/landing/terror site, and the game crashes then as well, always with the same error message.

Of course, it could be that since I'm new to the whole SVN-ing / compiling process, I might have made a mistake somewhere - if that's the case, if someone could point me in the right direction, I'd be much obliged.